|
Fitting Guide
|
|
Welcome to the HiSpec Fitting Guide. We hope that through
this selection of pages you will find all the information you need to fit
your HiSpec brakes, from the initial fitting of the kit through to a
comprehensive bedding in process.
|
| Big Disc Kit
Big Disc Kit Series 2 RST & Sunny
On these pages
you will find instructions on how to fit your new Big Disc Kit (retaining
standard calipers). There is a slightly different method to fitting a Big
Disc Kit on the S2 RST and this is also explained on the big disc kit series 2
page.
|
| Caliper Conversion
This page gives instructions on fitting a conversion that includes a new
HiSpec caliper. The method of fitting the kit is the same regardless of
which HiSpec caliper you are fitting, from the Ultralites to the Mega
Monsters the principal of fitting the kit is the same.
|
Bleeding the brakes, road testing the kit immediately after
fitting and bedding the new brakes in are vital parts of fitting new brakes
and so we have included detailed guides into how to do this most effectively
and successfully.
|
| |
If at any point during the fitting of your brakes you are
unsure or worried please contact us for advice
|
|
Warning: The installation of any
component or kit must only be performed by persons with experience in the
installation and proper operation of disc brake systems. It is the
responsibility of the purchaser to ensure that the fitter is fully competent
to carry out the installation. |
